Home / Length & Area

Directory

Length & Area Converters

Convert length and area units for home projects, land measurement, sewing, woodworking and schoolwork. Each tool shows the exact conversion factor and a worked example, so you can check the math yourself.

Length converters

Area & land converters

Specialty measurements

Length and area conversion chart

The US customary system and the metric system are tied together by one exact definition: 1 inch = 2.54 centimeters. Every other length factor below follows from it.

FromToMultiply by
InchesCentimeters2.54 (exact)
FeetMeters0.3048 (exact)
YardsMeters0.9144 (exact)
MilesKilometers1.609344 (exact)
MetersFeet3.28084
KilometersMiles0.621371
Square feetSquare meters0.092903
AcresSquare feet43,560
AcresHectares0.404686
HectaresAcres2.47105

Which converter should I use?

Why area factors are squared

Area is length × length, so the length factor is squared. One yard is 3 feet, so one square yard is 3 × 3 = 9 square feet. One meter is 3.28084 feet, so one square meter is about 10.764 square feet. Forgetting to square the factor is the most common area conversion mistake.

A worked project: flooring a room

Most length and area questions come from a real job. Here is a typical one from start to finish, showing where each converter fits.

  1. Measure. The room is 12 ft 4 in by 15 ft 9 in. Convert to decimal feet first: 12.33 ft and 15.75 ft. The feet and inches calculator does this without rounding errors.
  2. Find the area. 12.33 × 15.75 = 194.3 square feet. If the flooring is sold in square metres, divide by 10.764 to get 18.05 m²; the area converter handles it either way.
  3. Add waste. Allow 5% to 10% for cuts and offcuts, more for diagonal layouts. At 10%, you need about 214 square feet.
  4. Round to packs. If a box covers 22 square feet, 214 ÷ 22 = 9.7, so buy 10 boxes.

The same steps work for paint (using wall area minus windows and doors), turf, tiles and fencing. For fencing you need the perimeter rather than the area: add up the lengths of every side, then convert to the units your supplier sells in.

Measuring accurately

Who uses which units

The US uses inches, feet, yards and miles for nearly everything outside science and medicine. The UK is officially metric but road distances and speed limits are in miles, people often give height in feet and inches, and property is sometimes advertised in square feet. Canada and Australia are fully metric for official purposes, although Canadian construction still runs largely in feet and inches, and both countries' older property records may show acres. Land in most of the world is measured in hectares, while the US and UK use acres; the acreage calculator and yards to acres calculator cover those.

One foot, two definitions (until recently)

Since 1959 the international foot has been exactly 0.3048 metres. For decades US land surveys used a slightly different "US survey foot" (1200/3937 m), which differs by only 2 parts per million. That is invisible on a bookshelf but adds up to several feet over hundreds of miles of state coordinate grids. The survey foot was officially retired at the end of 2022, so all new US work uses the international foot, though older deeds and maps may still reflect the old one.

Frequently asked questions

How many centimeters are in an inch?

Exactly 2.54 centimeters. The inch has been defined this way by international agreement since 1959.

How many square feet are in an acre?

43,560 square feet, which is about 4,047 square meters or 0.4047 hectares. A square acre is roughly 208.7 feet on each side.

How do I convert feet to meters?

Multiply feet by 0.3048. For example, 10 feet × 0.3048 = 3.048 meters. To go the other way, multiply meters by 3.28084.

What is the difference between an acre and a hectare?

A hectare is 10,000 square meters, about 2.471 acres. Hectares are used in most of the world for land; acres are standard in the US and UK.

Related categories