How it works
To turn a decimal inch into a fraction, multiply by the denominator (say 16), round to the nearest whole number for the numerator, then reduce the fraction by the greatest common divisor.
numerator = round(decimal × denominator)
fraction = numerator / denominator, then reduce
Worked example
0.375 inches × 16 = 6, so 6/16, which reduces to 3/8" (9.525 mm).
Decimal to fraction chart (sixteenths)
Tape measures and rulers are marked in fractions, usually to 1/16 inch, while drawings and calipers give decimals. Rounding to the nearest sixteenth leaves an error of at most 1/32 inch (0.031", about 0.8 mm); choose 1/32 or 1/64 for finer work such as machining.
Millimeters to the nearest fraction of an inch
Metric and fractional sizes are close but rarely identical, so don't swap a metric wrench or drill bit for an inch size on tight-tolerance work.
Nominal vs actual lumber sizes
Choosing the right precision
- 1/8": rough framing and landscaping.
- 1/16": finish carpentry, cabinets and most DIY projects.
- 1/32": fine woodworking and furniture.
- 1/64" or decimals: metalworking and machining, where calipers read to 0.001".
Frequently asked questions
How do I convert a decimal inch to a fraction?
Multiply by 16, round, and reduce. 0.375 → 6/16 → 3/8.
What is 0.25 inches as a fraction?
Exactly 1/4 inch (6.35 mm).
What is 0.625 inches as a fraction?
5/8 inch (0.625 × 16 = 10, so 10/16, which reduces to 5/8).
What is 0.3 inches as a fraction?
To the nearest sixteenth, 5/16 inch (0.3125). To the nearest 1/32, 5/16 again, since 0.3 × 32 = 9.6 rounds to 10/32.
What fraction is 0.875 inches?
7/8 inch, because 0.875 × 8 = 7.
What is the actual size of a 2×4?
1-1/2 inches by 3-1/2 inches. Lumber is named by its rough-sawn size before drying and planing.