Area in different units
The same plot expressed in acres, hectares, and thousands of square feet.
Home / Length & Area / Acreage Calculator
Area
Enter a plot's length and width to get its area in acres, hectares, square feet, and square meters. Works in feet, yards, or meters.
Area
1.001 acres
Area in different units
The same plot expressed in acres, hectares, and thousands of square feet.
Acreage is just an area, found by multiplying length by width for a rectangular plot. Convert that area into acres by dividing by the number of square units in one acre.
A 200 ft × 218 ft plot is 43,600 ft², which is 43,600 ÷ 43,560 ≈ 1.00 acre.
An acre is 43,560 square feet (4,046.86 m²), which is the area of a rectangle 66 feet by 660 feet, the old chain-by-furlong measure. There is no fixed shape, so any plot whose length × width equals 43,560 ft² is one acre.
| Area | Acres |
|---|---|
| 5,000 ft² (typical small city lot) | 0.115 |
| 10,890 ft² (a quarter acre) | 0.25 |
| 21,780 ft² (a half acre) | 0.5 |
| 100 × 200 ft | 0.459 |
| 208.7 × 208.7 ft | ≈ 1 |
| An American football field with end zones (360 × 160 ft) | 1.32 |
| 1 hectare | 2.471 |
For an irregular lot, split it into rectangles and triangles, work out each area (a triangle is half of base × height), add them in square feet and divide by 43,560. Property records and plat maps list the official acreage, which can differ from a tape-measure estimate.
| 1 acre equals | Value |
|---|---|
| Square feet | 43,560 |
| Square yards | 4,840 |
| Square meters | 4,046.86 |
| Hectares | 0.4047 |
| Square miles | 0.0015625 (1/640) |
| Shape | Area formula | Example |
|---|---|---|
| Rectangle | length × width | 150 × 300 ft = 45,000 ft² = 1.03 acres |
| Triangle | ½ × base × height | ½ × 200 × 150 ft = 15,000 ft² = 0.34 acres |
| Trapezoid | ½ × (side a + side b) × height | ½ × (100 + 160) × 200 ft = 26,000 ft² = 0.60 acres |
| Circle | π × radius² | radius 100 ft = 31,416 ft² = 0.72 acres |
Split an odd-shaped plot into these shapes, add the areas together, then divide the total square feet by 43,560.
Divide the asking price by the acreage to compare land listings. A 2.5-acre lot listed at $75,000 costs $75,000 ÷ 2.5 = $30,000 per acre.
Acreage is easier to picture as a square. Here is the side length of a perfectly square plot for common sizes; real lots are usually longer and narrower, but the area is the same.
| Lot size | Square feet | Side of a square plot | In metres |
|---|---|---|---|
| ¼ acre | 10,890 | 104.4 ft | 31.8 m |
| ½ acre | 21,780 | 147.6 ft | 45.0 m |
| 1 acre | 43,560 | 208.7 ft | 63.6 m |
| 2 acres | 87,120 | 295.2 ft | 90.0 m |
| 5 acres | 217,800 | 466.7 ft | 142.2 m |
| 10 acres | 435,600 | 660.0 ft | 201.2 m |
A 10-acre square is exactly one furlong (660 ft) on each side, a neat link back to the old surveying units the acre came from.
The acreage on a listing is the whole parcel, but you rarely get to use all of it. Before comparing lots by price per acre, subtract the parts you cannot build on or use:
Two lots of the same size and price can offer very different usable land, so ask for the survey and the zoning rules before you compare.
For a rough figure, pace or tape the boundaries, sketch the shape, and split it into rectangles and triangles using the formulas above. Online county GIS maps and phone mapping apps let you trace a boundary on an aerial photo, and are usually within a few percent on open land, less accurate under trees or on small lots. Phone GPS walking apps can be off by several metres at each corner, which matters a lot on a quarter-acre lot and very little on 40 acres. For anything involving money, a fence on the boundary or a building near it, rely on a licensed survey.
The UK still uses acres for farmland and in many property listings, alongside hectares. Canada measures most rural land officially in hectares, though acres remain common in conversation and in older title records. Australia uses hectares for rural land and square metres for suburban blocks, and the word "acreage" there usually means a rural-residential property of a few acres on the edge of a town. One hectare is 2.471 acres, so a 2-hectare block is just under 5 acres. For converting other area units, such as square metres to square feet, the area converter covers every common pair, and the yards to acres calculator handles square yards.
Length × width for the area, then divide by 43,560 (ft²) or 4,046.86 (m²) to get acres.
43,560 ft² (about 4,047 m²), roughly a football field without the end zones.
43,560 square feet, or about 4,047 square meters.
10,890 square feet, for example a lot about 104 feet by 104 feet or 90 by 121 feet.
4,840 square yards.
Divide it into rectangles, triangles and other simple shapes, calculate each area in square feet, add them up, then divide by 43,560.