Tons per material for this volume
The same cubic-yard volume weighs different amounts by material.
Home / Volume / Cubic Yards to Tons
Volume ↔ Weight
Convert a volume of gravel, sand, topsoil, or concrete in cubic yards to US tons and metric tonnes, using typical material densities.
Weight (US tons)
14 tons
Tons per material for this volume
The same cubic-yard volume weighs different amounts by material.
Weight equals volume times density. Landscaping and construction materials have well-known typical densities in tons per cubic yard, so multiplying gives a reliable estimate for ordering by the ton.
10 cubic yards of dry gravel at 1.4 tons/yd³ is 10 × 1.4 = 14 US tons (about 12.7 tonnes).
Suppliers sell by the ton or the cubic yard, and densities vary with moisture and grading, so treat the conversion as an estimate and add 5 to 10% for compaction and waste. The table uses the same typical densities as the calculator.
| Material (1 cubic yard) | Approx. weight |
|---|---|
| Mulch | 0.5 tons (1,000 lb) |
| Topsoil | 1.1 tons |
| Dirt / fill | 1.25 tons |
| Sand (dry) | 1.35 tons |
| Gravel (dry) | 1.4 tons |
| Wet sand | 1.7 tons |
| Concrete | 2.03 tons |
One cubic yard spread 3 inches deep covers 108 square feet (324 ÷ 3); at 2 inches it covers 162 ft². So a 10 × 20 ft patio base of gravel 4 inches deep needs about 2.5 cubic yards, roughly 3.5 tons.
| Depth | Area covered by 1 cubic yard |
|---|---|
| 1 inch | 324 sq ft |
| 2 inches | 162 sq ft |
| 3 inches | 108 sq ft |
| 4 inches | 81 sq ft |
| 6 inches | 54 sq ft |
| 12 inches | 27 sq ft |
| Material | Cubic yards per ton |
|---|---|
| Mulch | about 2.0 |
| Topsoil | about 0.9 |
| Fill dirt | about 0.8 |
| Dry sand | about 0.74 |
| Gravel | about 0.71 |
| Concrete | about 0.49 |
About 1.4 US tons, depending on moisture and stone size.
Multiply by the material's tons-per-cubic-yard density.
At 1.4 tons per cubic yard, one ton is about 0.71 cubic yards, covering roughly 77 square feet at 3 inches deep.
About 0.9 cubic yards at a typical 1.1 tons per cubic yard.
Multiply length × width in feet, then divide by 81 for a 4-inch depth. A 12 × 50 ft driveway needs about 7.4 cubic yards.
About 2,800 lb (1.4 tons) dry, more when wet.