Home / Force, Pressure & Torque / Pressure Conversion

Pressure

Pressure Conversion

Convert between PSI, bar, kilopascals, megapascals, atmospheres, and torr (mmHg) instantly, with a full equivalents table and comparison chart.

Result

2.21 bar

Equivalent pressure

Your value in PSI, bar, atmospheres, and kilopascals.

How it works

Pressure is force per unit area. All these units express the same thing relative to the SI pascal (one newton per square meter), so conversion is a matter of scaling to and from pascals.

1 PSI = 6894.76 Pa  ·  1 bar = 100 000 Pa
1 atm = 101 325 Pa = 14.6959 PSI = 760 torr

Worked example

A tire at 32 PSI equals 32 × 6894.76 = 220 632 Pa, which is about 2.21 bar or 2.18 atm.

Torr, mmHg and atmospheres

One standard atmosphere is defined as exactly 101,325 Pa, and one torr is defined as exactly 1/760 of an atmosphere (about 133.322 Pa). A millimeter of mercury (mmHg) is defined slightly differently, from the pressure of a mercury column, but the two differ by only about one part in seven million, so they are used interchangeably for vacuum gauges and blood pressure.

atm = torr ÷ 760 · torr = atm × 760
1 torr ≈ 133.322 Pa ≈ 0.019337 psi

Worked example

A rough vacuum reading of 380 torr is 380 ÷ 760 = 0.5 atm, or about 7.35 psi absolute. A medium vacuum of 1 torr is 0.00132 atm.

Pressure unit conversion table

1 unitpsibarkPaatmtorr (mmHg)inHg
1 psi10.068956.8950.0680551.712.036
1 bar14.50411000.98692750.0629.53
1 kPa0.145040.0110.009877.50060.2953
1 atm14.6961.01325101.325176029.92
1 torr0.019340.0013330.13330.00131610.03937

Pressures in everyday life

ExamplePressure
Standard sea-level air14.7 psi = 1.013 bar = 29.92 inHg
Air at 5,000 ft (Denver)about 12.2 psi
Air at the summit of Everestabout 4.9 psi (34 kPa)
Healthy blood pressure120/80 mmHg (about 2.3/1.5 psi)
Pressure cookerabout 15 psi above atmospheric
Espresso machineabout 9 bar (130 psi)
Full scuba tankabout 3,000 psi (207 bar)
Deepest ocean (Mariana Trench)about 1,086 bar (15,750 psi)

Gauge vs absolute pressure

For single-pair conversions, see the psi to bar and psi to kPa converters.

Which pressure unit each field uses

Pressure has more units in daily use than almost any other quantity, because each trade settled on the one that gives convenient numbers for its job. Knowing which one to expect saves a lot of confusion when reading a manual or a spec sheet.

FieldUsual unitTypical values
Tires, compressors, plumbing (US)psi32 psi tire, 90 psi air tools
Tires and pumps (Europe, UK)bar2.2 bar tire, 9 bar espresso
Tire placards (Canada, Australia)kPa, often with psi220 kPa tire
Weather mapshPa (millibars); inHg in US broadcasts1013 hPa average, 980 hPa storm
Blood pressuremmHg120/80 mmHg
HVAC duct and gas line pressure (US)inches of water column (inWC)0.5 inWC duct static pressure
Vacuum systemstorr, mbar, microns1 torr rough vacuum
Engineering and sciencePa, kPa, MPaConcrete strength 25–40 MPa

Inches of water column: the small unit HVAC uses

Furnaces, air handlers and gas appliances work at pressures so low that psi would give awkward decimals. One inch of water column is the pressure at the bottom of a column of water one inch tall: about 249 Pa, or 0.036 psi. A typical residential duct system runs at around 0.5 inWC total external static pressure (about 125 Pa), and natural gas in a house is delivered at about 7 inWC, roughly a quarter of a psi. If a technician quotes a reading in inWC, multiply by 0.0361 for psi or by 249 for pascals.

Weather pressure in millibars and inches of mercury

Meteorologists in the UK, Canada and Australia report air pressure in hectopascals, which are identical to millibars. US weather broadcasts use inches of mercury. Average sea-level pressure is 1013.25 hPa or 29.92 inHg. A reading around 980 hPa (28.94 inHg) signals a deep low-pressure system with wind and rain, while the strongest tropical cyclones on record have dropped below 900 hPa. To convert, divide hPa by 33.864 for inHg, or multiply inHg by 33.864 for hPa.

Water depth and pressure

Pressure under water rises by about 1 bar, or 14.5 psi, for every 10 metres (33 feet) of depth, on top of the 1 bar of air pressure at the surface. A diver at 20 m therefore experiences about 3 bar absolute. The same rule explains water pressure in buildings: a water tank or reservoir 30 m above a tap delivers roughly 3 bar (43 psi) at that tap before pipe friction. Plumbers in the UK quote mains pressure in bar, typically 1 to 3 bar at the kitchen tap, while US building codes generally cap household pressure at 80 psi (5.5 bar) and recommend a reducing valve above that.

Reading spec sheets correctly

Frequently asked questions

How many PSI is 1 bar?

About 14.5038 PSI. One PSI is about 0.0689 bar.

What is 1 atmosphere in PSI?

14.6959 PSI, which is also 101.325 kPa, 1.01325 bar, or 760 torr.

How do I convert torr to atm?

Divide by 760, because one standard atmosphere is exactly 760 torr. 380 torr = 0.5 atm.

Is torr the same as mmHg?

For practical purposes, yes. They are defined differently but differ by about one part in seven million.

What is 1 inHg in psi?

About 0.491 psi. Standard atmospheric pressure is 29.92 inHg, or 14.696 psi.

What is the difference between psig and psia?

psig is gauge pressure, measured relative to the surrounding air; psia is absolute pressure, measured from a vacuum. At sea level psia = psig + 14.7.

Related calculators