Home / Force, Pressure & Torque / PSI to Bar

Pressure

PSI to Bar Converter

Convert PSI to bar and bar to PSI instantly, with the exact factor, a full equivalents readout and a comparison chart. Ideal for tire pressure, bike pumps, air compressors and hydraulic specs.

Result

2.21 Bar

Equivalent pressure

Your value shown in PSI, bar, kilopascals and atmospheres.

How to convert PSI and bar

PSI (pounds per square inch) is the pressure unit used across the United States for tires, air tools and plumbing, while bar is the metric unit common on European cars, dive gear and pumps. Both scale directly to the SI pascal, so the conversion is a single fixed factor.

bar = PSI ÷ 14.5038  (PSI × 0.0689476)
PSI = bar × 14.5038

Worked example

Your car door sticker calls for 32 PSI. Divide by 14.5038: 32 ÷ 14.5038 = 2.21 bar, so a European gauge reading in bar should show about 2.2.

Quick reference

An easy anchor to remember: 1 bar ≈ 14.5 PSI, and 2 bar ≈ 29 PSI. Most passenger-car tires live between 2.1 and 2.5 bar (30–36 PSI).

PSI to bar reference table

PSIBarWhere you see it
15 PSI1.03 barCompact spare tire (low)
30 PSI2.07 barSmall car tire
32 PSI2.21 barTypical car tire
35 PSI2.41 barSUV / light truck tire
44 PSI3.03 barMax sidewall pressure
100 PSI6.89 barAir compressor line
120 PSI8.27 barRoad bike tire

Extended PSI to bar chart

PSIBarPSIBar
201.38453.10
251.72503.45
302.07604.14
322.21805.52
352.411006.89
402.7615010.34

Typical pressures in PSI and bar

UsePSIBar
Passenger car tires30–362.1–2.5
Road bike tires80–1105.5–7.6
Gravel bike tires30–502.1–3.4
Mountain bike tires22–351.5–2.4
Home air compressor tank125–1758.6–12.1
Household water pressure40–602.8–4.1
Scuba cylinder (full)3,000about 207

Tire pressure tips

Where you will need to switch between psi and bar

European and Asian cars in the US (and the reverse)

Many cars built for global markets print tire pressures in bar or kPa on the placard, with psi alongside or not at all. European placards also often list two sets of pressures: one for normal loads and a higher one for a fully loaded car or sustained motorway speeds, sometimes with an "eco" setting that trades a little comfort for lower rolling resistance. A placard reading 2.3 bar front and 2.5 bar rear for full load is about 33 and 36 psi.

Pressure washers

US pressure washers are rated in psi, European ones in bar. A 2,000 psi electric unit is about 138 bar; a 3,000 psi gas machine is about 207 bar. When comparing models across markets, check whether the figure is the "maximum" pressure (often a brief peak) or the rated working pressure, which is lower and matters more. Cleaning power also depends on flow rate in gallons or litres per minute, so a lower-pressure washer with higher flow can clean faster on large surfaces.

Air tools and compressors

Most pneumatic tools are designed for 90 psi (6.2 bar) at the tool. Compressors are often sold by maximum tank pressure, such as 150 psi (10.3 bar), but what matters for running tools is the air delivered at 90 psi, so compare that figure rather than the tank rating.

Diving cylinders

Scuba tanks are filled to around 200 to 232 bar in Europe, Australia and much of Asia, and to about 3,000 psi in the US. Those sound like different standards, but 3,000 psi is 207 bar, so they are close. Higher-pressure 300 bar tanks (about 4,350 psi) use DIN valves designed for that pressure, and fill stations will only fill a cylinder to the pressure stamped on it.

Converting without a calculator

For quick estimates, use 1 bar ≈ 14.5 psi, or the even rougher 1 bar ≈ 15 psi:

Bar and kPa are both metric and always convert by moving the decimal point. Psi is the odd one out, which is why the psi to kPa converter is a useful companion to this page for readers in Canada and Australia.

One more thing about gauges

Cheap pencil and dial gauges can read a few psi off, which is a significant error on a 32 psi tire. If two gauges disagree, check them both against a quality digital gauge, and use the same gauge every time so readings are at least consistent. A gauge that shows only bar is no less accurate than a psi gauge; the conversion is exact, and only the gauge itself introduces error.

Frequently asked questions

How many PSI is 1 bar?

About 14.5038 PSI. To convert bar to PSI, multiply by 14.5038.

How do I convert PSI to bar?

Divide the PSI value by 14.5038 (or multiply by 0.0689476). For example, 32 PSI ÷ 14.5038 = 2.21 bar.

What is 32 PSI in bar?

32 PSI, a typical car tire pressure, equals about 2.21 bar.

What is 2.5 bar in PSI?

About 36.3 PSI, from 2.5 × 14.5038.

Is bar bigger than PSI?

Yes. One bar is roughly 14.5 times larger than one PSI, so the same pressure is a smaller number in bar.

Is 1 bar the same as 1 atmosphere?

Almost. 1 bar is 100,000 Pa and 1 atm is 101,325 Pa, so 1 bar equals about 0.987 atm.

What is 2.2 bar in PSI?

About 31.9 PSI (2.2 × 14.5038).

Does tire pressure change with temperature?

Yes. It drops about 1 psi for every 10 °F of cooling, which is why tires often look low on the first cold morning of the season.

Related calculators